Flashing the wrong BIOS can cause irreparable damage to the system. Please do not flash the BIOS UNLESS your system has a BIOS-related issue.Power off the system after the update finished. Type "fs0:" to change path when you see Shell prompt.Ĥ. Unzip the file and copy to the USB flash drive with FAT32 format.Ģ. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 ~ 24V DC jack is covered if the internal 2-pin power connector is to be used.ġ. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.Ĭaution: There is no isolation circuitry between the external +12 ~ 24V DC jack and the internal 2-pin power connector. Internal Power Supply – the board can alternatively be powered via the internal +12 ~ 24V 2-pin power connector, where pin 1 is +12 ~ 24V and pin 2 is GND.
The rear +12 ~ 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 ~ 24V and the shell is GND. Intel fTPM 2.0 (PTT) Trusted Computing Firmwareġ 12 ~ 24V DC-in Jack (1-pin 2.5mm ID, 5.5mm OD)ģ USB Pin Header for up to 5 additional USB 2.0 Portsġ 30-pin 24-bits Dual Channel LVDS/Inverter (1920 * 1080 60Hz)Įxternal Power Supply – the board can be powered with a +12 ~ 24V external power supply though a DC connector on the back panel. Realtek ALC888 or ALC897 HD Audio (Manufacturered after March 2021) Requires Intel Core processor with Intel HD Graphics * Core i3, Pentium, and Celeron can only support DDR4-2400 up to 32GB Total
8th & 9th Gen Intel® Core i7 / i5 / i3 / Pentium Processor up to 65WĢ x 260-pin SODIMM un-buffered DDR4-2666 up to 64GB Total
0 kommentar(er)
